Skip to content

Print DPI Calculator

Find the largest sharp print size your photo can make.

Print resolution calculator

Image

Drop an image
or click to choose

Manual entry

—

Common sources
I want to know
Print sizedot = quality for this image
Viewing distance
—

Auto uses 1.5× the print diagonal, the distance people naturally stand to take in a whole print.

Effective resolution

—
—

Enter pixel dimensions or drop an image.

Pixelated <150Okay 150–239Excellent 240+
Print size
—
For 300 PPI
—
Layout
—
—

DPIMax print sizeQuality

Field guide for photographers & sellers

How big can you print it? Resolution, size and distance explained

Print quality comes down to one ratio: how many pixels you have for every inch of paper. Everything else, from the DPI field in your editor to the megapixels on the camera box, is a way of talking about that ratio.

01Pixels decide, not the DPI field

A file’s stored DPI is a suggestion, not a property of the image. A 6000 × 4000 photo saved at 72 DPI and the same photo saved at 300 DPI are pixel-for-pixel identical. Print either at 20 × 13.3 inches and you get exactly 300 pixels per inch.

effective PPI = pixels along an edge / inches along that edge
max print size (in) = pixels / target PPI
max print size (cm) = pixels / target PPI × 2.54

That is why this calculator reads the stored value for reference but always calculates from the pixel dimensions.

02Pixels needed for common print sizes

SizeAt 300 PPIMegapixelsAt 150 PPI
4 × 6 in1200 × 18002.2 MP600 × 900
5 × 7 in1500 × 21003.2 MP750 × 1050
8 × 10 in2400 × 30007.2 MP1200 × 1500
12 × 18 in3600 × 540019.4 MP1800 × 2700
16 × 20 in4800 × 600028.8 MP2400 × 3000
24 × 36 in7200 × 1080077.8 MP3600 × 5400
8 × 8 in square2400 × 24005.8 MP1200 × 1200
A51748 × 24804.3 MP874 × 1240
A42480 × 35088.7 MP1240 × 1754
A33508 × 496117.4 MP1754 × 2480
A17016 × 993369.7 MP3508 × 4967

Any recent phone (12 MP and up) prints an 8 × 10 or A4 at full 300 PPI. A 24 MP camera reaches 13 × 20 inches at 300 PPI and nearly double that at 150.

03Why viewing distance changes everything

Normal vision resolves detail down to about one arcminute. The further away a print is, the fewer pixels per inch the eye can tell apart:

PPI the eye can resolve ≈ 3438 / viewing distance (in inches)
Viewing distancePPI that looks perfectly sharpTypical print
25 cm / 10 in344Photo book, hand-held 4×6
50 cm / 20 in1728×10, A4 on a desk or shelf
1 m / 39 in87Framed 16×20, A2 on a wall
2 m / 79 in44Large poster across a room

People naturally stand about one and a half times the diagonal away from a print to see all of it, which is the auto distance this tool uses. That is why a 24 × 36 inch poster at 150 PPI looks crisp on the wall even though the color bar calls it “okay”: the dashed line on the bar shows what is actually needed at that distance.

If anyone will inspect the print up close, such as at an exhibition or on a product sold for its detail, judge by the color bar. If it will hang on a wall, judge by the viewing distance verdict.

04Aspect ratio and cropping

A camera’s 3:2 frame does not match 8×10 (4:5) or A4 (1:1.41). Something has to give:

  • Fill scales the image until it covers the paper and crops the overflow. Effective PPI is set by the edge that runs out first, and the tool shows how much of the picture is lost.
  • Fit scales the image until it fits inside the paper and leaves white borders on two sides. Nothing is cropped, and the effective PPI is higher.

The paper preview shows the cropped area in Fill mode, so you can see whether the edges you care about will survive. For exact control over the crop, frame the image first with the Aspect Ratio Cropper.

05When pixels run short

  1. Choose a smaller size or a size people will view from further away.
  2. Avoid cropping if the composition allows: switch to Fit and use the border as a mat.
  3. Upscale deliberately with a dedicated tool before sending the file, rather than letting the printer interpolate. Up to about 1.5× is rarely visible; beyond 2×, softness shows on close inspection.
  4. Pick a forgiving paper. Matte and textured papers hide softness better than glossy ones.

06Sending files to a print lab

  • Export at the exact print size at 300 PPI unless the lab specifies otherwise, and set the stored DPI to match so their software sizes it correctly.
  • Add bleed if the lab asks for it, typically 3 mm or 1/8 inch on every edge, so trimming never leaves a white sliver.
  • Use sRGB for consumer labs and the lab’s ICC profile for fine-art printing.
  • Send JPEG at maximum quality or TIFF. Never send a file that has been compressed for the web.

Questions

Frequently asked

01What DPI do I need for a sharp print?

For prints viewed in the hand, such as 4×6 to 8×10 photos and photo books, aim for 300 pixels per inch; 240 is indistinguishable for most images. Larger prints are viewed from further away, so the requirement drops: about 150 PPI is plenty for a poster viewed from a metre, and billboards are printed at 10 to 20 PPI. The calculator estimates a typical viewing distance for each size and tells you whether the print will look sharp from there.

02Does changing the DPI in Photoshop make my image better quality?

No. The DPI or PPI number stored in a file is only a note that suggests a print size. Changing it without resampling leaves every pixel untouched, so quality does not change. What decides print quality is how many pixels the image has compared with the physical size you print it at. This tool shows the stored value for reference but calculates from the pixel dimensions.

03What is the difference between DPI and PPI?

PPI (pixels per inch) describes how densely an image's pixels are spread across the paper. DPI (dots per inch) describes how many ink dots a printer lays down, and printers use several dots to reproduce each pixel, which is why printers advertise 1200 or 2400 DPI. In everyday use, and in print lab requirements, DPI almost always means PPI, so this calculator treats them as the same thing.

04How many megapixels do I need for an 8×10 or A4 print?

At 300 PPI, an 8×10 inch print needs 2400 × 3000 pixels, about 7.2 megapixels, and A4 needs 2480 × 3508 pixels, about 8.7 megapixels. Any modern phone camera exceeds that. At 150 PPI the requirement drops to a quarter. Remember that cropping reduces your pixel count, so check the cropped size rather than the camera's headline resolution.

05My image is below the target. Can I upscale it?

Upscaling software can enlarge an image smoothly and AI upscalers can add plausible detail, which often looks better than letting the printer stretch a small file. It cannot recover real detail that was never captured. For enlargements up to about 1.5 times, a good resampling algorithm is usually invisible in print; beyond 2 times, choose a smaller print size or view the print from further away.

Keyboard shortcuts

Switch: quality at a size / largest size at a DPIM
Previous / next print size[ ]
Target DPI: 300, 240, 150, 721–4
Toggle Fill / FitF
Swap pixel width and heightR
Toggle inches / centimetresU
Open an image / sampleO S
This panel?